FOAMBOARD POSTERS
Consider foamboard posters the next time you need a sturdy and portable display tool for your event. Normal posters are not mounted and can be rolled up, but you find upon unrolling the poster that they tend to curl at the edges and just will not remain flat to be viewed nicely by your audience. Posters can be mounted onto a foamboard backing. These foamboard come in a full piece size of 4 ft x 8 ft. That is around 1.2m x 2.4m. In order to mount your poster onto the foamboard, we will paste it onto the foamboard (the foamboard comes with an adhesive side). This process can either be done manually or using a machine. We have to do it thoroughly so that there is no bubble (when air pocket gets trapped under the poster). That will result in an unsightly outcome. So it's not really something you should DIY if you've never done it before. The foamboard can be trimmed to whatever size your poster is - A4, A3, A2, A1 or A0 size. If you want to know more about poster sizes, you can refer to this blog article on poster sizes.
Foamboard Posters for Republic Polytechnic
POSTERS WITH DISPLAY STANDS
You can fit the poster with one of our display stands which we offer on the Display Stands page. Choices range from the tripod easel to the clip stand or the slot stand. Propping up a foamboard poster on the stand will make it easily visible and more outstanding to attract attention. So do consider Foamboard Posters the next time you are thinking of a marketing tool that's nifty and light!
